NPS -- Network Policy Server (RADIUS)

NPS je nástupce dřívějšího RADIUS serveru.

Nastavení WPA-Enterprise

The first step is installing AD CS and NPS on your clean Windows Server 2008 install…

  1. First, you’ll need to join the server to your existing domain and then restart;
  2. After the server restarts, open Server Manager;
  3. Click on the Roles node;
  4. Click on the Add Roles;
  5. On the Server Roles screen, select Active Directory Certificate Services and Network Policy and Access Services;
  6. Follow the wizard, selecting Network Policy Server when configuring the Network - Policy and Access Services role and leaving the default Certification Authority role service selected for AD CS;
  7. Select Enterprise for the setup type for AD CS;
  8. Choose Root CA for the CA Type (remember we’re assuming that this is the first - Certification Authority in your environment, so if it’s not you either don’t need to install this role, or if you choose you can configure this server as a Subordinate CA instead);
  9. Run through the rest of the wizard, making any changes you may wish to, otherwise just leave the defaults as they are appropriate (I changed the CA Common Name to the name of the server, as I think it’s cleaner) – Note that there is a warning at the end of the wizard, stating that the name of this server cannot be changed after installing the AD CS role.

Now that you have a Root CA and an NPS server on your domain, we can start configuring it…

  1. Open an MMC console, and go to File → Add/Remove Snap-in…
  2. Add the Certificates snap-in, selecting Computer account for the local computer;
  3. Expand Certificates (Local Computers) → Personal, right click on Certificates and choose Request new certificate;
  4. Follow the wizard, choosing Computer for the certificate type and then click the Enroll button, then close MMC;
  5. Open the Network Policy Server administrative console from Administrative Tools;
  6. Right click on the parent node, NPS (Local) and click Register server in Active Directory – Click OK on the two informational popups;
  7. With the NPS (Local) node still selected, choose RADIUS server for 802.1X Wireless or Wired Connections and then click on the Configure 802.1X button;
  8. Under Type of 802.1X connections, select Secure Wireless Connections and provide an appropriate name for the policies which will be created as part of this wizard;
  9. In the next step, you’ll need to configure a RADIUS client (by the way, RADIUS stands for Remote Authentication Dial In User Service), so click on the Add button;
  10. The RADIUS client will be your wireless access point, so for the friendly name type in something to identify the access point (for example, AP01), then provide the IP address or DNS entry for the access point;
  11. Click on the Generate radio button, and then click on the Generate button to generate a shared secret – Copy the shared secret to a notepad document, and click OK – Note that on my particular access point, a character limit of 22 characters exists for shared secrets so I had to cut the string down to the acceptable limit, so I would suggest checking for this limitation on your own hardware;
  12. Click Next, and then choose Microsoft: Protected EAP (PEAP) and then click on the Configure button (if you get an error message, you probably didn’t follow steps 1 → 4 correctly);
  13. Ensure that the Certificate issued drop down box has the certificate you enrolled in step 4;
  14. Click Next, and then click on the Add button to use an Active Directory group to secure your wireless (you should add both the machine accounts and user accounts to this group to allow the machine to authenticate on the wireless before the user logs in);
  15. On the next step of the wizard, you can configure VLAN information, otherwise just accept defaults to complete;
  16. Restart the Network Policy Server service.

If you expand the Policies node now, you’ll see that the wizard has created a Connection Request Policy and a Network Policy containing the appropriate settings to authenticate your wireless connection – These individual policies can obviously be created manually, but the wizard is an easier method.

You can also remove the less secure authentication method options, and increase the encryption methods in the network policy if you wish (I have configured mine this way)…

  1. Under the Network Policies node, bring up the properties of the newly created policy;

On the Constraints tab, uncheck all of the checkboxes under Less secure authentication methods;

  1. On the Settings tab, click on Encryption and uncheck all boxes except Strongest encryption (MPPE 128-bit);
  2. Save the policy and then restart the Network Policy Server service.

With the NPS server configured to accept requests from your wireless access point, you’ll now need to configure the access point to communicate with the NPS servers – These instructions are for my Linksys WAP54G, but will be similar to most access points which support RADIUS…

  1. In the web interface for the access point, click on the Wireless tab and assign an appropriate SSID;
  2. Click on the Security sub-tab, and set the Security Mode to WPA-Enterprise (if your access point supports WPA2-Enterprise, use this instead);
  3. Set the Encryption to AES, and then provide the NPS server IP as the RADIUS Server and the Shared Secret that you saved in step 11 above;
  4. Save your settings and restart the access point.

Now your access point should be configured to talk to your NPS server, so all that is left is to configure your clients to connect – The recommended way of doing this, would be to use Group Policy, but the instructions below are for configuring a Windows Vista client – You can easily replicate these actions in a Group Policy under the Security node.

To configure a Windows Vista client which is joined to the domain…

  1. Open up the Network and Sharing Center;
  2. Click on Connect to a network;
  3. Locate the network you have just secured (it should say Security-enabled network next to it) and click the Connect button;
  4. It will take a short while to set up the profile and then connect successfully.

You can also configure a few extra settings to speed up the time it takes to connect (it won’t improve the overall speed, only the time it takes to initially connect to the wireless network)…

  1. In the Network and Sharing Center, click on Manage wireless networks and then double click the network you set up above;
  2. Click the Security tab, and then the Settings button below;
  3. The Validate server certificate checkbox should already be selected by default, but you should also select the CA that you set up earlier under the Trusted Root - Certification Authorities to speed up the certificate verification process;

You can also check the box Do not prompt user to authorize new servers or trusted certification authorities in order to improve the user’s experience. zdroj: http://techblog.mirabito.net.au/?p=87