Rozdíly
Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.
| Obě strany předchozí revize Předchozí verze | |||
|
windows:devcon [29.03.2011 16:16] sebi [Zdroje] |
windows:devcon [29.03.2011 16:19] sebi |
||
|---|---|---|---|
| Řádek 50: | Řádek 50: | ||
| This time it should come back happy and tell you that everything is working properly. The card should now be available in Sysconfig and the Hyper-V remote admin tools. | This time it should come back happy and tell you that everything is working properly. The card should now be available in Sysconfig and the Hyper-V remote admin tools. | ||
| + | |||
| + | ===== Nastavení přístupu do Device Manageru přes mmc z jiného serveru ===== | ||
| + | |||
| + | netsh advfirewall firewall set rule group=“remote administration” new enable=yes | ||
| + | |||
| + | The above command will allow for most remote management tools to work out-of-the-box. However, in addition to allowing the MMC snap-ins through the firewall, using Device Manager remotely requires additional configuration. If you don't perform the following steps you will end up with this error: | ||
| + | |||
| + | Running Device Manager remotely | ||
| + | |||
| + | To allow Device Manager to connect to a remote computer, you must first enable the “Allow remote access to the PnP interface” setting on the target computer's Local Group Policy. | ||
| + | |||
| + | 1. On a Windows Vista or Windows Server 2008 installation, start the Group Policy Object MMC snap-in by typing MMC in the Run box and pressing Enter. | ||
| + | |||
| + | 2. In the Add or Remove Snap-Ins window, scroll to find Group Policy Object Editor, and click Add. | ||
| + | |||
| + | 3. In the Select Group Policy Object window, click Browse. | ||
| + | |||
| + | 4. In the Browse for Group Policy Object window, click Another Computer, and either type or browse for the remote server core machine. | ||
| + | |||
| + | 5. In the Select Group Policy Object window, click Finish. | ||
| + | |||
| + | 6. In the Add or Remove Snap-Ins window click Ok. | ||
| + | |||
| + | 7. In the Group Policy of the remote computer, navigate to Computer Configuration -> Administrative Templates -> System -> Device Installation. | ||
| + | |||
| + | 8. Enable the Allow remote access to the PnP interface setting. | ||
| + | |||
| + | 9. Close the MMC console (you don't have to save it, but you can if you want to). | ||
| + | |||
| + | 10. Restart the Server Core installation. | ||
| + | |||
| + | Now you can connect to the remote server core machine and manage its devices by using Device Manager. | ||
| + | |||
| + | 1. Open Computer Management through the Administrative Tools folder. | ||
| + | |||
| + | 2. Right-click Computer Management and select Connect to another computer. | ||
| + | |||
| + | 3. In the Select computer window, type or browse to the remote server core computer. Click Ok. | ||
| + | |||
| + | 4. Expand System tools -> Device Manager. Note that now you can perform changes on the listed devices. | ||
| + | |||
| + | And that's it! You are done! | ||
| + | |||
| ===== Zdroje ===== | ===== Zdroje ===== | ||
windows/devcon.txt · Poslední úprava: 29.03.2011 16:19 autor: sebi